At the moment we turn on the computer then you will hear the sound coming out from the internal speaker casing which is connected to the motherboard. The sound is usually named after the Beep. The voice that issued may vary depending on the computer at that time. By knowing the meaning of sound (beep) when booting then automatically we can know the condition of the computer. But do you know the meaning of the beep noises?
Simply beep sound is there are 2 kinds of the long and short beep beep. Here's the full explanation:
* Short Beep 1X = Computer running normally
* short beeps repeated = There are problems on the motherboard. We could check the condition of the motherboard, check the hardware devices attached to the motherboard, check all the data cable, power cable and so forth.
* Beep length 1X = There are problems in memory. To find out about memory problems please read the article about the damage Knowing Memory / RAM
* 1X Long Beep followed by short beeps 3X = There are problems with the VGA Card / Graphics Card. Check VGA Card from several possibilities, such as less securely plugged into its socket, the bottom of the VGA (golden) dirty, try VGA card belonged to someone else into our motherboard and so forth.
* There is no sound at all = Could not sure which part of the hardware devices that have problems. If this happens then we can examine all parts of the hardware device, unpack all the contents of the casing and then paired it correctly. It will be good before it is installed, we clean the first of the dust.
By knowing the meaning of the beep sound on the process of detection and computer problems can be identified early.
No comments:
Post a Comment