The high temperature of the processor can become the main drivers of a computer becomes a problem / hang. How not?, "otak'nya this computer has a topnotch role to perform all processes within the computer. The following tips will explain how to care for our processor so as not to heat faster and thus have a stable and optimal performance.
Thermal Paste / Thermal Grease
Thermal Paste / Thermal Grease is a material (shaped like a gel) that serves to remove heat from the processor to the heatsink. Judging from its function then the existence of Thermal Paste is very important. Make sure the top of your processor thermal paste has been smeared by this. For information, silver-colored thermal paste / silver have better quality than the white.
Position Casing
Casing you should be in place that has good air circulation and smooth. The position of the casing is poor air circulation will lead to the high temperature inside the casing hardware components, especially processors. You can set the room where your computer is
Heatsink and Fan
Cables are milling about in caisng can inhibit the flow of air inside the casing. The result can lead to high processor temperature. Rapihkan cables especially with the type of ATA cable because this type of cable has a relatively large size and width when compared with the SATA cable.
Open the casing cover
For those of you who use a personal computer (not used for general), could open the casing cover (either the right or left). It's quite effective for air circulation in the casing. But it's this way could reduce the aesthetic value because of the casing to be less unsightly due to its hardware components become visible. But if you put the casing under a desk or a corner then you can try it out so it does not reduce the value of aesthetics.
No comments:
Post a Comment